Liquid Chromatograph Mass Spectrometer FM-LCMS-A100 menawarkan pemisahan senyawa yang dioptimalkan dan tepat dengan laju aliran pompa 1 hingga 4.000 µL/menit. Dilengkapi dengan ESI dan MRM canggih untuk meningkatkan sensitivitas dan selektivitas. Memiliki antarmuka yang ramah pengguna untuk mengontrol parameter operasional. Terintegrasi dengan teknologi detektor pengganda untuk pengukuran akurat berkecepatan tinggi. Liquid Chromatograph Mass Spectrometer kami menawarkan kuantifikasi multi-komponen dan analisis kualitatif yang dapat diandalkan.
Di dyrec, kami berkomitmen untuk memberdayakan bisnis Anda dengan solusi terkini. Rotary joint berkualitas terbaik kami dirancang untuk mengoptimalkan kinerja peralatan Anda.
Ambil langkah selanjutnya menuju kesuksesan dengan menghubungi kami atau mengunduh panduan produk komprehensif kami. Perjalanan Anda menuju kesuksesan Anda dimulai di sini.
Kromatograf Cair Spektrometer Massa banyak digunakan dalam analisis komponen terarah untuk keamanan air dan makanan, deteksi penyakit metabolik genetik neonatal, analisis lingkungan, penelitian klinis, dan laboratorium.
| Solvent Selection | Switchable between two solvent pairs (A/B or C/D) |
| Degasser Type | Vacuum Degasser, Separate degasser for each pump |
| Pump Flow Range | 1 to 4,000 µL/min |
| Maximum Pump Pressure | ≥ 18,850 psi |
| Pump Flow Rate Accuracy | ≤ 1% |
| Pump Flow Rate Precision | ≤ 0.075% RSD |
| Sample Injection Modes | Full loop injection Partial loop injection Microliter pickup |
| Injection Repeatability | Full loop:< 0.3 % RSD Partial loop: < 0.3 % RSD Microliter pickup: < 1 % RSD |
| Cross Contamination | < 0.05 % |
| Maximum Sample Capacity | 384 bits; 96 bits for standard liquid injection |
| Maximum Column Oven Capacity | Six 250 mm long chromatographic columns |
| Oven Temperature Control Range | RT + 5 °C to 90 °C |
| Oven Temperature Control Mode | Preheating of flowing phase + forced air circulation |
| Ion Source Type | Orthogonal Vertical Spray |
| Ion Source Gas Supply | Atomizing nitrogen: 0 to 2 L/min Desolvation nitrogen: 0 to 15 L/min |
| Maximum Spray Voltage | 6 kV |
| Control | Flow rate, voltage and temperature set via software interface |
| Exhaust System | Yes, prevents backflow and reduce memory effect |
| High-Temperature Blowback Gas | Nitrogen with flow rate of 0 to 5 L/min |
| Vacuum Interface Heating Design | Interface can be heated up to 110°C |
| Vacuum Interface Maintenance | Simple cleaning and maintenance without vacuum unloading |
| Ion Transmission System | 4-stage differential vacuum with multiple quadrupole transmission for accurate ion focusing |
| Mass Analyzer | Triple Quadrupole |
| Quadrupole Material | Molybdenum |
| Collision Cell Gas | Nitrogen supplied in a cylinder (purity > 99.999%) |
| Resolution | 0.4 to 2 amu (adjustable) |
| Mass Stability | Better than 0.1 amu/24 hours |
| Scanning Speed | ≥ 20,000 amu/s |
| MRM Channels | 100 channels/s |
| Mass Range (M/Z) | 5 to 1,000 amu |
| Dynamic Range | 6 orders of magnitude |
| Sensitivity | ESI+ MRM mode: 1 pg reserpine, S/N ≥ 100,000:1 ESI- MRM mode: 1 pg chloramphenicol, S/N ≥ 100,000:1 |
| Scanning Functions | Full scan Selected ion monitoring (SIM) Product ion scan Precursor ion scan Neutral loss scan Multiple reaction monitoring (MRM) Positive/negative ion switching scan, etc |
| Detector Type | Pulse-counting detector |
| Detector Technology | Multiplier without positive/negative ion discrimination |
| Polarity Switching Time | ≤ 50 ms |
| Vacuum System | Composed of mechanical and turbo molecular pump (With differential pumping and automatic power-off protection) |
| Operating Temperature | 18 to 25 °C |
| Operating Humidity | (20 ~ 60) % RH |
| Power Supply | Five sets of single phases (220 ± 20) V AC, 10 A, 50 Hz |
Ulasan
Belum ada ulasan.